Specification:

Item type: Soil tester.

Test range: PH/Moisture/Light Intensity

Color: Green.

PH range: 3.5~8.0

Moisture: 0~10

Light intensity: 0~2000LM

Size:As pictures shown.

Operation:

Step 1: Switch moisture/pH/light position

Step 2: Stick the probe into the soil about 2-4 inches

Step 3: Adjust the position of the probe until the pointer on the dial swing slightly

Step 4: After 10 minutes, Note moisture/pH/light level in the dial

Step 5: Remove probe from soil and wipe clean after each use

Tips:
Don't insert the probe against stone or very hard soil in case to damage the probe
Please wipe and clean the probe after each time using.
Don't leave the meter in the soil for a long time
Designed for testing soil, don't use it to test pure water or other liquids.
The indicator will not move If the soil is too dry, please water the plant first and test again later.
matters needing attention:
Note：
1. Attention everyone~Before inserting into the soil, please wet the soil with water. The probe should be inserted into 2/3 of the soil depth (above 10CM) to measure accurately.

2. When using, be careful not to touch stones when inserting the electrode, and do not apply too much force, otherwise it may damage the electrode. After use, clean the electrode in a timely manner (it is strictly prohibited to directly measure in water).

3. Cannot be used in soil for a long time! To avoid damage.

Package includes:

1* Soil tester